Skip to content
Svenska Elektrod
Back to all articles
News

ArcDroid PLUS – new controller turns the plasma robot into a standalone cutting station

Svenska Elektrod 19 October 2026 4 min read

ArcDroid from 2 AM Innovations is a portable CNC plasma robot that sits directly on your workbench or the plate itself. More than 8,000 machines are in use across 14 countries, and we sell and service them in Sweden. Now comes the biggest upgrade since launch: the PLUS controller, which replaces the original control unit and turns ArcDroid into a standalone cutting station.

ArcDroid in brief

ArcDroid is built for workshops that need CNC precision without installing a plasma table. The machine weighs under 16 kg, sets up in under five minutes and has a cutting area of about 66 × 38 cm with cutting speeds of up to 5 m/min. It works with plasma cutters from a wide range of manufacturers – often the one you already have.

What made ArcDroid popular is Simple Trace: you guide a stylus around a template or a part, point by point or freehand, and the machine turns the motion into a cut file you can run again and again. No drawing, no computer.

The PLUS controller – what's new

The PLUS controller takes it a step further. Instead of tracing or transferring files from a computer, you design the part right on the machine.

  • 10-inch HD touchscreen. Capacitive, 720 × 1280 pixels, adjustable brightness – easy to read even in a bright workshop.
  • Eight times the memory. Handles much larger and more complex DXF files than the standard controller.
  • 12 parametric shapes. Tabs, flanges, angle iron, bolt circles and more. Enter the dimensions and cut.
  • Text on the machine. Three stencil fonts for signs, markings and name plates.
  • Unlimited patterning. Full X/Y arrays for cutting many identical parts from one sheet.
  • Run From Here. Start or resume cutting from any shape in the program – ideal after an interruption or a consumable change.
  • Standalone mode. USB-C power and a regular USB mouse. No laptop needed in the workshop.

Plug-and-play on the machine you already have

The PLUS controller uses the same connector and the same mounting pattern (four holes, 100 × 100 mm) as the original Simple Trace controller. You swap the unit – no changes to the arm and no rewiring.

Files are read as G-code and DXF from a FAT32 USB stick. Software updates are free for life and installed via USB, with new shapes and fonts added over time. The housing is cast aluminium with a laser-cut steel front and rubber corner bumpers built for workshop life. The controller ships with a quick-start guide and a one-year warranty.

Not sure your machine is compatible? Send us its serial number and we'll check.

Who is PLUS for?

  • Workshops with recurring parts – brackets, flanges and plates that are measured and cut by hand today.
  • Installation and field service – ArcDroid with PLUS fits in the service van and needs no computer on site.
  • Schools and training – students see what will be cut right on the screen, without learning CAD first.
  • Anyone who already owns an ArcDroid – same machine, far more possibilities.

Upgrade your ArcDroid

The PLUS controller costs SEK 7,749 excl. VAT and is available in our webshop. Stock is limited in the first delivery – order online or contact your nearest store in Täby, Älvsjö, Köping or Skövde. Don't have an ArcDroid yet? We're happy to demonstrate the machine at your site.

Order the ArcDroid PLUS controller in the webshop →

ArcDroid PLUS – new controller turns the plasma robot into a standalone cutting station
#ArcDroid #Plasma cutting #CNC

How can we help?

Looking for something that isn't in the shop, or have questions about training, welding processes or automation? Get in touch for a quote or advice.