Skip to content
Svenska Elektrod
Back to all articles
Knowledge

Can you weld with a cobot?

Svenska Elektrod 10 October 2021 2 min read

The term cobot – collaborative robot – was coined by Universal Robots when it launched the world's first commercial cobot in 2008. Today many manufacturers make collaborative robots, and the most common application is machine tending. But more and more companies are now looking at automating manual tasks – and welding is one of them.

Robot welding is nothing new

Large welding cells with industrial robots, positioners and safety guarding have been around for a long time. They are usually programmed by a robot programmer, while the welder – the person who can actually judge weld quality and adjust parameters – is often not involved.

With modern power sources and filler metals designed for robotic welding, it is now possible to weld well in almost any position. With a cobot the welder can teach the paths themselves, while the robot delivers the repeatability.

Industrial robot or cobot?

A cobot isn't the answer to everything. Three things decide:

  • Reach. Collaborative robots are approaching 2 metres of reach. For welding a UR10e (1,300 mm) is often enough – with smart placement you can weld parts of roughly 2,000 × 1,000 mm.
  • Payload. In welding the payload is rarely more than a few kilos, so it is seldom a limitation.
  • Speed. The welding itself is slow (often under 1 m/min), but moves between joints are much faster with a guarded industrial robot. If you need very short cycle times, an industrial robot may be the right choice.

When should you choose a cobot?

When none of the points above is a blocker – and when you want the welder to own the process. Adding more synchronised axes quickly increases complexity, so that's worth thinking through carefully.

We build cobot welding cells with Universal Robots and power sources from Lorch and others, and run Universal Robots Core Training. Contact us and we'll do test welds on your parts.

#Cobot welding #Universal Robots #Automation

How can we help?

Looking for something that isn't in the shop, or have questions about training, welding processes or automation? Get in touch for a quote or advice.